Kinrande: Gold Fired Over Red Overglaze Enamel

A lidded kinrande bowl in close-up: red and gold enamels cover the white porcelain edge to edge in cloud and floral panels, with a small red mark inside the lid knob

Kinrande is the technique of firing gold onto a piece that has already been decorated with akae or other overglaze enamels.

The name comes from textiles. The most sumptuous silk brocade, shot through with gold thread, was called kinran, and the ware was named after that same glitter. It began at Jingdezhen in Ming-dynasty China, and in Japan it developed through ko-Imari and then through Kutani ware and the Eiraku line of Kyo ware.

Red and gold is the most formal pairing in Japan. Kinrande is still made today as ware for celebrations.

Three trips through the kiln

A kinrande piece is fired three times.

  • 1. Main firing Around 1,300°C. The body is vitrified and the clear glaze turns to glass
  • 2. Overglaze enamels Around 800°C. Red, green, yellow and other overglaze enamels are fixed
  • 3. Gold Around 750–800°C. The gold alone is fired at a lower temperature still

Why separate the gold? Because gold fixes at a lower temperature than the other enamels, and even slightly too much heat burns it away. At the temperature that brings out the red, the gold would be lost. So the steps are split. Three trips through the kiln also means three chances to crack.

Fresh from the kiln, the gold is not yet bright

Gold that has just come out of the kiln looks a dull brown.

Only after it is burnished with an agate rod or fine sand does the shine appear. This step is called kinmigaki, and depending on how hard it is worked the surface can end up mirror-bright or quietly matte.

You can tell hand-painting from transfer by the edges of the gold. If the line swells and thins where the brush enters and leaves, it was painted by hand. If the width never varies, it is a transfer.

Akae, iroe and kinrande compared

NameWhat leadsHow it reads
AkaeRed line work and fillFine lines carry the design. Gold is absent or barely used
Iroe and gosaiRed, green, yellow, purple, indigo blueColours laid on thickly. Held to the light they glow like toffee
KinrandeA red ground plus gold patternThe surface is filled with red, then drawn over in gold. Gold goes on last

Kinrande is a form of akae, and its most elaborate finish. Within Kutani itself, ko-Kutani fills the surface with green and yellow in the aote manner, while kinrande works in red and gold. Two opposite readings of the same appetite for splendour.

Living with kinrande

Because the gold sits on top of the glaze rather than under it, there are rules.

  • No microwave Gold is metal. It sparks, and the piece is damaged
  • Avoid the dishwasher Heat, pressure and strong alkaline detergent fade the gold
  • Do not drag metal cutlery across it This is where gold wears away fastest
  • No abrasives or bleach Wash by hand with a soft sponge and a neutral detergent

Keep to those four and the gold lasts remarkably well. Gold still survives on Edo-period ko-Imari precisely because it was treated this way. For more, see how to care for Japanese ceramics.

Related terms and reading

Related terms

Read further

See the brushwork in person

We do not carry kinrande itself yet, but akae, iroe and other painted japanese pottery are here, and no two pieces share the same waver of line or thickness of enamel. Nokaze introduces painted ceramics for sale alongside the artists who painted them.

Browse painted ceramics

FAQ

How is kinrande different from akae?
Kinrande is a form of akae and its most elaborate finish. In akae, red line work and fill carry the design, and gold is either absent or used very sparingly. Kinrande fills the surface with red and then fires gold on top of that. Because kinrande only exists once akae is in place, it sits on the same lineage, at the far end of it.
Can kinrande pieces go in the microwave or dishwasher?
Avoid both. Gold is metal, so a microwave produces sparks and damages the piece. A dishwasher fades the gold little by little through heat, pressure and strong alkaline detergent. Wash by hand in lukewarm water with a soft sponge and a neutral detergent. Not dragging metal cutlery across the surface is the other thing that keeps gold looking new.
Can you tell hand-painted kinrande from a transfer?
Look at the edges of the gold. If the line swells and thins where the brush enters and leaves, it was painted by hand; a transfer keeps an even width. Run a finger over it too: a faint thickness suggests honkin, gold powder ground into a medium, while no step at all points to liquid mizukin.

Shop the related pieces

New to Japanese pottery? Start here — its history, how pottery differs from porcelain, the clays and glazes behind each style, and how to care for a piece. → Japanese Pottery: The Complete Guide

Meet the Artisans

Delivery fee

From our Kyoto warehouse to the world. Shipping is a flat rate by region.

HK$50

Free shipping on orders over HK$1,500

Other additional taxesNo additional charge

No, there isn't.

No customs duties or sales taxes are levied on imported ceramics. You will not pay anything other than the displayed price.

NT$450

Free shipping on orders over NT$5,990

Other additional taxesPayment on arrivalDDU

Customs duties and business tax

It is not included in the price of the product. You will pay it directly to the delivery company or customs upon delivery. The amount varies depending on each country's system.

We don't currently ship to countries and regions not listed above. If you would like to purchase, please contact us.

View Delivery Policy

Contact Us

Please feel free to contact us regarding our services,
partnership, or orders. We look forward to hearing from you.

Contact Us

Meet the artisans behind the pottery

One artisan's story at a time, with the pieces they make, sent from our shop in Kyoto. Join today and get 5% off your first order.

Emails from Nokaze, Kyoto. Unsubscribe anytime. See our Privacy Policy.